Share:
Specifications
Weight(grams): 3000
Dimension: 2 cm (Length) x 2 cm (Width) x 2 cm (Height)
Role and Functions
- Moisture Removal: The drier removes moisture from the refrigerant before it enters the A/C system's evaporator. Excess moisture can freeze and block the system or cause corrosion.
- Refrigerant Filtration: It filters out impurities and debris from the refrigerant to prevent damage to the A/C components.
- Pressure Regulation: The drier helps regulate the pressure within the A/C system, ensuring optimal performance and preventing potential damage due to pressure imbalances.
- Desiccant: A moisture-absorbing material inside the drier that captures and holds water.
- Filter: Traps contaminants and debris from the refrigerant.
- Pressure Relief Valve: Prevents excessive pressure buildup within the drier.
- Regular Inspection: Check the drier for any signs of leaks, damage, or contamination. Leaks or corrosion can compromise its function.
- Replace When Needed: Follow the vehicle manufacturer’s recommendations for replacing the drier, typically every 2 to 4 years, or if you experience A/C performance issues.
- Monitor A/C Performance: If you notice reduced cooling efficiency, strange noises, or inconsistent A/C performance, the drier might need to be checked or replaced.
- Professional Servicing: Have the drier inspected and replaced by a professional technician during routine A/C system maintenance or when other components are serviced.
- Locate the Drier: Typically found along the A/C system's refrigerant lines, often near the condenser.
- Inspect for Leaks: Check for any signs of refrigerant leakage or physical damage.
- Replace If Necessary: If the drier is clogged, damaged, or has reached the end of its service life, replace it according to the vehicle’s manual or seek professional assistance.
汽车空调系统中的干燥器简介
汽车空调系统中的干燥器（也称为接收器-干燥器或蓄冷器）是一个关键组件。以下是其作用、功能及维护方法的简要介绍：
作用和功能
- 去除湿气：干燥器在制冷剂进入空调系统的蒸发器之前去除湿气。过多的湿气可能会结冰堵塞系统或导致腐蚀。
- 过滤制冷剂：过滤掉制冷剂中的杂质和碎屑，以防止损坏空调组件。
- 压力调节：干燥器有助于调节空调系统内的压力，确保最佳性能，防止因压力不平衡而造成的潜在损坏。
- 干燥剂：干燥器内部的吸湿材料，用于捕捉和储存水分。
- 过滤器：捕捉制冷剂中的污染物和碎屑。
- 压力释放阀：防止干燥器内部压力过高。
- 定期检查：检查干燥器是否有泄漏、损坏或污染的迹象。泄漏或腐蚀可能会影响其功能。
- 必要时更换：根据车辆制造商的建议更换干燥器，通常每2到4年更换一次，或当空调性能出现问题时。
- 监测空调性能：如果注意到制冷效率降低、噪音异常或空调性能不一致，干燥器可能需要检查或更换。
- 专业保养：在例行空调系统维护或其他组件维修时，请专业技术人员检查和更换干燥器。
- 定位干燥器：通常位于空调系统的制冷剂管路上，通常靠近冷凝器。
- 检查泄漏：检查是否有制冷剂泄漏或物理损坏的迹象。
- 必要时更换：如果干燥器堵塞、损坏或已达到使用寿命，请根据车辆手册更换，或寻求专业帮助。
Inquiry - 🔥READY STOCK 🔥STEEL DRIER 516 X '0' 1P H.DUTY (AM-1135)
View more
Drier
