2
Share:
🔥READY STOCK 🔥 ORIGINAL BOSCH 9280 050 013 12V 20A 4PIN RELAY
RM25.00
Category:
Relay
Select variant(s): MODEL
MODEL:
Specifications
Weight(grams): 2000
Dimension: 3 cm (Length) x 3 cm (Width) x 2 cm (Height)
Role and Functions
- Control Electrical Circuits: Relays act as switches to control high-current components of the A/C system, such as the A/C compressor and fans. They allow low-current control signals to manage these high-power components.
- Protect Electrical Components: By using a relay, you prevent high current from flowing directly through low-current switches or controls, which helps to protect delicate components from damage.
- Improve System Reliability: Relays help ensure reliable operation of the A/C system by providing consistent switching actions and reducing the load on the vehicle’s main control circuits.
- Compressor Relay: Controls the activation of the A/C compressor.
- Fan Relay: Controls the operation of the condenser fan or blower fan.
- Regular Inspection: Periodically check the relays for signs of wear, corrosion, or damage. Look for any burnt or melted connectors and wiring.
- Listen for Operation: Pay attention to any clicking noises from the relay when the A/C system is activated. If there’s no sound, the relay might be faulty.
- Check for System Performance: If the A/C system is not operating correctly, such as the compressor or fan not engaging, it may be due to a faulty relay.
- Verify Electrical Connections: Ensure that all electrical connections to the relay are secure and free of corrosion. Clean or replace any connectors as needed.
- Professional Testing: If you suspect a relay issue, use a multimeter to test the relay’s functionality. If the relay is defective, replace it with a new one according to the vehicle manufacturer’s specifications.
- Locate the Relay: Relays are usually found in the fuse box or relay panel under the hood or dashboard.
- Inspect for Damage: Check the relay and its connections for any signs of damage, corrosion, or melting.
- Test the Relay: Use a multimeter or relay tester to ensure the relay is functioning properly.
- Clean and Secure Connections: Ensure that all electrical connections are clean and secure.
- Replace if Necessary: If the relay is found to be faulty, replace it with a new relay that matches the vehicle's specifications.
汽车空调系统中的继电器简介
汽车空调系统中的继电器是一个电气开关，用于控制各种组件的电路开关。以下是其作用、功能及维护方法的简要介绍：
作用和功能
- 控制电路：继电器作为开关，控制空调系统中的高电流组件，如空调压缩机和风扇。它们允许低电流的控制信号来管理这些高功率组件。
- 保护电气组件：通过使用继电器，可以防止高电流直接通过低电流开关或控制装置，从而保护敏感组件免受损坏。
- 提高系统可靠性：继电器通过提供一致的开关动作，并减少主控制电路的负载，帮助确保空调系统的可靠操作。
- 压缩机继电器：控制空调压缩机的激活。
- 风扇继电器：控制冷凝器风扇或鼓风机的操作。
- 定期检查：定期检查继电器是否有磨损、腐蚀或损坏的迹象。查看是否有烧焦或熔化的连接器和电线。
- 注意操作声音：激活空调系统时，注意继电器是否发出点击声。如果没有声音，继电器可能有故障。
- 检查系统性能：如果空调系统工作不正常，如压缩机或风扇未启动，可能是继电器故障导致的。
- 验证电气连接：确保继电器的所有电气连接稳固且无腐蚀。根据需要清洁或更换连接器。
- 专业测试：如果怀疑继电器有问题，使用万用表测试继电器的功能。如果继电器损坏，请按照车辆制造商的规格更换新继电器。
- 定位继电器：继电器通常位于发动机盖下方或仪表板内的保险丝盒或继电器面板中。
- 检查损坏：检查继电器及其连接器是否有明显的损坏、腐蚀或熔化。
- 测试继电器：使用万用表或继电器测试仪确保继电器正常工作。
- 清洁并固定连接：确保所有电气连接干净且稳固。
- 必要时更换：如果继电器出现故障，请更换符合车辆规格的新继电器。
Inquiry - 🔥READY STOCK 🔥 ORIGINAL BOSCH 9280 050 013 12V 20A 4PIN RELAY
View more
Relay
