Share:
Specifications
Weight(grams): 4000
Dimension: 5 cm (Length) x 3 cm (Width) x 7 cm (Height)
Role and Functions
- Low-Pressure Transport: The suction hose transports low-pressure, low-temperature refrigerant vapor from the evaporator (where it absorbs heat from the cabin) to the compressor. This refrigerant is then compressed and sent to the condenser.
- Connection: It connects the evaporator to the compressor, completing a crucial part of the refrigerant cycle in the A/C system.
- Insulation: Many suction hoses are insulated to prevent condensation and heat transfer, which helps maintain the efficiency of the refrigerant.
- Regular Inspection: Periodically check the suction hose for signs of wear, damage, or deterioration, such as cracks, bulges, or leaks. Inspect both the hose and its connections.
- Check for Leaks: Look for refrigerant leaks around the suction hose. Leaks can result in reduced A/C performance and refrigerant loss.
- Ensure Proper Installation: Make sure the hose is properly secured and connected. Loose or improperly connected hoses can lead to inefficiencies and leaks.
- Avoid Damage: Protect the hose from potential damage due to contact with sharp objects, excessive heat, or mechanical stress.
- Professional Service: During routine A/C maintenance, have a professional technician inspect the suction hose for damage or wear and replace it if necessary.
- Locate the Hose: The suction hose is usually found running between the A/C evaporator and the compressor, often routed along the engine bay or under the dashboard.
- Inspect the Hose: Check for visible damage, such as cracks, bulges, or abrasions. Examine the hose fittings and connections for tightness.
- Check for Leaks: Use a leak detection method, such as a UV dye or electronic leak detector, to identify any refrigerant leaks around the hose.
- Secure and Replace: Ensure the hose is properly secured. If the hose is damaged or leaking, replace it with a new one that matches manufacturer specifications.
- Verify System Operation: After maintenance or replacement, test the A/C system to ensure it is functioning correctly and efficiently.
汽车空调系统中的吸气管简介
汽车吸气管是汽车空调系统中的重要组件，负责将低压制冷剂气体从蒸发器输送到压缩机。以下是其作用、功能及维护方法的简要介绍：
作用和功能
- 低压输送：吸气管将低压、低温的制冷剂气体从蒸发器（在这里吸收车厢内的热量）输送到压缩机。然后，制冷剂被压缩并送往冷凝器。
- 连接：它连接蒸发器和压缩机，完成空调系统中制冷剂循环的关键部分。
- 绝缘：许多吸气管具有绝缘层，以防止冷凝和热量传递，从而帮助保持制冷剂的效率。
- 定期检查：定期检查吸气管是否有磨损、损坏或老化的迹象，如裂纹、鼓包或泄漏。检查管道及其连接处。
- 检查泄漏：检查吸气管周围是否有制冷剂泄漏。泄漏可能导致空调性能下降和制冷剂流失。
- 确保正确安装：确保管道正确固定和连接。松动或连接不当的管道会导致系统效率下降和泄漏。
- 避免损坏：保护管道不受尖锐物体、过热或机械应力的损害。
- 专业服务：在例行空调维护时，请专业技术人员检查吸气管是否损坏或老化，并在必要时进行更换。
- 定位管道：吸气管通常位于空调蒸发器和压缩机之间，通常沿着发动机舱或仪表板下方布置。
- 检查管道：检查是否有明显的损坏，如裂纹、鼓包或磨损。检查管道接头和连接处的紧固情况。
- 检查泄漏：使用泄漏检测方法，如紫外线染料或电子泄漏检测器，识别管道周围的制冷剂泄漏。
- 固定和更换：确保管道正确固定。如果管道损坏或泄漏，使用符合制造商规格的新管道进行更换。
- 验证系统运行：在维护或更换后，测试空调系统以确保其正常高效运行。
Inquiry - 🔥READY STOCK 🔥TOYOTA HILUX LN165 D4D ND SUCTION HOSE HS-3278.M
View more
Suction Hose
