Share:
🔥READY STOCK 🔥TOYOTA UNSER (OLD MODEL) 10PA 15C 1A 12V MAGNET CLUTCH MC-8025.A
RM117.00
Category:
Clutch Set
Specifications
Weight(grams): 5000
Dimension: 7 cm (Length) x 4 cm (Width) x 8 cm (Height)
Role and Functions
- Engagement and Disengagement: The clutch set allows the A/C compressor to engage (start working) and disengage (stop working) as needed. When the A/C is turned on, the clutch engages, and when it is turned off, the clutch disengages.
- Power Transfer: It transfers the engine's mechanical power to the A/C compressor when engaged, allowing the compressor to circulate refrigerant through the system.
- Control: It ensures that the compressor runs only when necessary, which helps in saving fuel and reducing engine load.
- Clutch Plate: Connects to the compressor shaft.
- Pulley: Connects to the engine via a belt and rotates continuously while the engine runs.
- Magnetic Coil: When energized, it creates a magnetic field that pulls the clutch plate to the pulley, engaging the compressor.
- Regular Inspection: Periodically check the clutch set for any signs of wear, damage, or misalignment.
- Belt Tension: Ensure the drive belt is properly tensioned to avoid slippage or excessive strain on the clutch.
- Cleanliness: Keep the clutch and surrounding areas clean from dirt, debris, and oil, which can affect performance.
- Lubrication: Ensure the clutch bearing is adequately lubricated to prevent friction and wear.
- Electrical Connections: Check the wiring and connections to the magnetic coil to ensure they are secure and free from corrosion.
- Professional Servicing: Have the A/C system inspected and serviced by a professional at regular intervals, as specified by the vehicle manufacturer.
在汽车空调系统中，离合器组件起着关键作用，负责将空调压缩机与发动机的动力进行接合和分离。以下是其作用、功能及维护方法的简要介绍：
作用和功能
- 接合与分离：离合器组件允许空调压缩机在需要时接合（开始工作）和分离（停止工作）。当空调打开时，离合器接合；当空调关闭时，离合器分离。
- 动力传递：当离合器接合时，将发动机的机械动力传递给空调压缩机，使其能够循环制冷剂。
- 控制：确保压缩机仅在需要时运行，帮助节省燃油并减轻发动机负荷。
- 离合器片：连接到压缩机轴。
- 皮带轮：通过皮带与发动机连接，发动机运转时不断旋转。
- 磁线圈：通电时产生磁场，吸引离合器片与皮带轮接合，从而启动压缩机。
- 定期检查：定期检查离合器组件是否有磨损、损坏或错位的迹象。
- 皮带张力：确保传动皮带张力适中，避免打滑或对离合器施加过大压力。
- 保持清洁：保持离合器及其周围区域的清洁，防止灰尘、碎屑和油污影响性能。
- 润滑：确保离合器轴承有足够的润滑，以防止摩擦和磨损。
- 电气连接：检查磁线圈的电线和连接是否牢固，且无腐蚀现象。
- 专业保养：按照车辆制造商的建议，定期请专业人士检查和保养空调系统。
Inquiry - 🔥READY STOCK 🔥TOYOTA UNSER (OLD MODEL) 10PA 15C 1A 12V MAGNET CLUTCH MC-8025.A
View more
Clutch Set
